If you have a fire or water emergency, please call us now at (706) 750-0200

To have the optimal experience while using this site, you will need to update your browser. You may want to try one of the following alternatives:

Fire & Water - Cleanup & Restoration

We Discuss Our Drying Goals During The Water Damage Restoration Process In Augusta

11/17/2019 (Permalink)

water damage in home We are proud to provide quality solutions throughout Martinez, Grovetown, and surrounding areas.

Drying Goals During Water Removal In Your Augusta Area Home

Water damage technicians create a drying goal during your Augusta home’s initial assessment. The drying goal should indicate the condition of materials and contents once restored to their natural preloss dryness. Qualified technicians should always monitor the drying process to determine if current procedures remain in-line with any established goals.

A drying goal for water removal in your Augusta area property is the intended result in affected areas after completing restoration services. Our technicians use years of experience, training, and advanced equipment to provide moisture content readings from dry, unaffected contents, and structure — readings in percentage for wood materials, and readings in points for non-wood materials.

SERVPRO technicians use drier air to increase the rate of evaporation while performing water removal services on your property – drier air means air with low humidity. A relative humidity (RH) of less than 40% is within the normal range for performing an effective drying solution. RH under 40% typically tells us that the air is dry and thirsty, allowing it to pull more water from wet materials within the affected area.

While measurements for RH does not guarantee that your structure is dry, reaching a low RH ensures that humidity within the affected area is decreasing. To determine whether the area is dry, SERVPRO technicians take specific humidity readings of the affected areas; these readings should match those taken in unaffected areas. We use moisture meters to measure the moisture content of wet materials found in your home.

SERVPRO water removal technicians set moisture content goals on a per-item basis – after establishing a drying standard and recording typical equilibrium moisture content (EMC). The dry standard is a moisture content reading taken from dry materials of the same type found in unaffected areas. We establish a dry standard or use a typical EMC of a material as a goal.  Once the readings match, the drying process is complete.

Contact SERVPRO of Augusta for access to full-service water removal, cleanup, and restoration services, 24-hours a day, 7-days a week. We are proud to provide quality solutions throughout Martinez, Grovetown, and surrounding areas. Call (706) 750-0200.

For more about Augusta click here.